manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 74

Change the language settings in Google Chrome

Introduction

You can change the language settings for Océ Express WebTools in your preferred browser.

When to do

NOTE

It is possible that the internet options are put under a different menu, depending on the Google
Chrome version you use.

Procedure

1.

Open Google Chrome.

2.

Click on the three-lined [Menu] icon next to the browser toolbar.

3.

Click on [Settings].

4.

Click on [Show advanced settings].

5.

Click on [Language and input settings...]. The languages window opens.

6.

Select the preferred language Click on the [Add] button, when you need to add a new language to
the list.

7.

Click on the preferred language and drag it to the top of the list.

8.

Click on [Done] to confirm your entry.

9.

Click on the [Refresh] icon in the toolbar. Océ Express WebTools is displayed in your preferred
language.

Change the language settings in Google Chrome

74

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands