manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 155

Set the Océ Finishing Assistant 

Introduction

This setting is only available when the [Configuration] - [Printer setup] - [Finishing] - [Finisher
type] setting is set to [Océ 2400 fanfold / Océ 4311 fullfold series].

The [Océ Finishing Assistant] can automatically detect the legend (if present) of a drawing and
rotate and align the drawing so the legend will be on the cover page of the fold package. If no
legend can be detected the print is delivered unfolded.

When enabled, the [Océ Finishing Assistant] overrules the default rotation and alignment settings
for folded output.

Procedure

1.

Open the [Preferences] - [Print job defaults] tab.

2.

Click on [Edit] in the [Layout] section, or click the [Océ Finishing Assistant] setting.

3.

Select [Enabled] if the printer must automatically detect the legend of your drawings and fold the
drawings correctly.

4.

Click [Ok] to confirm, or [Cancel] to reject your entries.

Set the Océ Finishing Assistant

Chapter 3 - Define your Workflow with Océ Express WebTools

155

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands