manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 278

Change the name of a scan job on the user panel

Introduction

You can make settings for a scan-to-file name in Océ Express WebTools under the [Preferences] -
[Scan job defaults] tab, but you can also change the name of the job on the user panel.

NOTE

• The name you enter is used for the next scan. It is not possible to change the name when the

scan starts or after the scan has been made.

• You can only change the name under the scan menu, not under any of the other menus.

When you cannot change the name, the name is grayed out.

Procedure

1.

Tap the scan tile on the user panel. A window with a list of presets opens. 

2.

Tap the file name of the job on the right hand corner, under the system menu thumbnail. 
A keyboard appears, with the current file name filled in.

3.

Use the erase key and fill in your preferred name. 

NOTE

Note that the file extension is automatically generated, so do not put the file extension in the
name.

4.

Click [OK] to confirm. Your preferred name is now used for the next scan.

Change the name of a scan job on the user panel

278

Chapter 4 - Use the Printing System

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands