manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 72

Set another language for Océ Express WebTools

Introduction

The language setting of the Internet browser you use defines the language of Océ Express
WebTools.

The following languages are supported: Dutch, UK English, German, French, US English,
Spanish, Danish, Italian, Swedish, Norwegian, Finnish, Portuguese, Polish, Hungarian, Czech,
Japanese, Simplified Chinese, Traditional Chinese, Russian and Korean.

NOTE

• This language setting does not influence the language on the user panel. On the user panel,

you can choose between the [First language] and the [Second language]. You can define the
values for the [First language] and the [Second language] in the regional settings of Océ
Express WebTools.

• When the selected language cannot be supported, the default language for Océ Express

WebTools

Set another language for Océ Express WebTools

72

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands