manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 238

The Image preset for copy jobs

Introduction

With the [Image] preset, the quality and the productivity of a copy job can be defined. There are
five pre-defined presets and a sixth custom preset you can create in Océ Express WebTools.

Image presets

Use the [Image] setting to select the default stamp for your output.

Image preset

Properties

[Normal color]

This preset is used by default. For most originals, good quality color
copies can be made.
The quality settings are balanced between color accuracy, and the en-
hancement of fine information while background is being suppressed.

[Photo/Poster]

Use the preset for the full range of a photo-like originals with high color
accuracy.

[Fast CAD]

Use the preset for color CAD drawings, when productivity is an impor-
tant factor.
Line information is enhanced and background is suppressed. When
you have a CAD original with large area fills, choose the [Normal color]
preset.

[Normal CAD B/W]

Use the preset for black and white CAD drawings, when quality is an
important factor.
Line information is enhanced and background is suppressed.

[Fast CAD B/W]

Use the preset for black and white CAD drawings, when productivity is
an important factor.
Line information is enhanced and background is suppressed. When
you have a black and white CAD original with large area fills, choose
the [Normal CAD B/W] preset.

The Image preset for copy jobs

238

Chapter 4 - Use the Printing System

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands