manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 118

Import a CA-signed certificate: Check and import the root

certificate

To ensure a fully trusted authentication via HTTPS, you can request and import a certificate
delivered by a Certification Authority (CA-signed certificate).

When you import the certificate you need to:
• import the root certificate
• Import the intermediate certificate
• Import the CA-signed certificate
•

Check and import the root certificate

Complete all procedures to successfully import the certificate.

Procedure

1.

On each workstation, open the web browser.

2.

Open the 'Certificates' option of the browser. 
For Internet Explorer: In the Tools - Internet Options - Content window, open "Certificates".

3.

Check whether the CA Root certificate is already displayed in the "Trusted Root Certification
Authorities" list.

4.

If it is not on the list, import the CA Root certificate.

Import a CA-signed certificate: Check and import the root certificate

118

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands