manualshive.com logo in svg

Canon Oce Colr Wave 500, Operation Manual

Share
Download
Canon Oce Colr Wave 500 Operation Manual Download Page 88

Scan queue functionality

The scan jobs in line waiting to be sent to the right location are listed in the Scan Queue. When a
job is successfully sent, the job is removed from the queue.

Functionality

Description

[Delete]

To delete a job from the queue, select the job and click [Delete].

[Retry]

To retry to send a job, select the job and click [Retry].

[Send to...]

To send a job to a new destination, select the job and click [Send to...].
Then select the destination.

The Smart Inbox and the queue functionality

88

Chapter 3 - Define your Workflow with Océ Express WebTools

Summary of Contents for Oce Colr Wave 500









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands