Cabletron Systems ELS10-26, Reference Manual

Page: 119 / 170

ELS10-26 MIB
6-7
lxadminAnyPass {lxadmin 2}
Octet String Read-Write
The authentication password (0-24 bytes) which must match the
community name in an SNMP Get, Getnext, or Set PDU, in order
for the operation to be performed. A zero length password
indicates that any community name is acceptable.
lxadminGetPass {lxadmin 3}
Octet String Read-Write
The authentication password (0-24 bytes) which must match the
community name in an SNMP Get or Getnext PDU (except for
debug or password parameters). A zero length password indicates
that any community name is acceptable. Alternatively, it is
acceptable if the community name matches lxsdminAnyPass,
defined above.
1
lxadminNMSIPAddr {lxadmin 4}
IP Address Read-Write
The address of the NMS to which Trap PDUs are to be sent. A
value of zero indicates that Trap PDUs should be sent to the NMS
last heard from.
lxadminStorageFailure {lxadmin 7}
Integer Read-Only
Whether the ELS10-26’s storage facility for its configuration
parameters has failed during the last update operation (if the
ELS10-26 reboots after such a failure, it will use the factory
specified defaults for all MIB parameters). Values include:
• true (1)
1.
Certain SetRequest PDUs are used for read operations and using
lxadminGetPass for the community name is sufficient. Those special conditions
consist of SetRequest PDUs for lxaddrOperation (for read-random, read-next,
and read-block only), and for all MIB variables in the lxaddr group described as
Write-Ignore.