Cabletron Systems ELS10-26, Reference Manual

Page: 118 / 170

6-6
ELS10-26 MIB
lxswBases {lxswFilesetEntry 7}
Octet String Read-Only
An array (4 octets per file), containing the software’s base loading
address of each of the files. Each address is encoded as a series of 4
bytes, which should be converted into a 32-bit integer.
lxswFlashBank {lxswFilesetEntry 8}
Integer Read-Only
The bank number where the software file set resides. The possible
values are:
• first-bank (1)
• second-bank (2)
6.1.3 Administration Group
lxadminFatalErr {lxadmin 1}
Octet String Read-Only
This is a 32-byte array which contains information about the cause
of the previous system reset. This will describe the circumstances
which forced the system software to perform a reboot. The values
in the first byte have the following meanings:
• (0) - Power failure
• (1) - Watchdog Timeout
• (2) - NMS Requested Shutdown; next three bytes are not
applicable; next four bytes contain the NMS’s IP address;
remaining 24 bytes are not applicable)
• (3-255) - Fatal Error