c. Click the settings icon (
) to the right of “Power Management”.
d. Click
Edit
.
e. Select “Sync with UPS connected to this TeraStation” and reconfigure the desired UPS settings.
f. Click
OK
when completed.
2
Click
Backup
.
3
Click the settings icon (
) to the right of “Failover”.
4
Click
Configure Failover
.
5
Click
Force Failover to Stop
to cancel the failover settings.
6
Shut down this main TeraStation.
7
Turn the backup TeraStation on.
8
Log in to Settings for the backup TeraStation, then rename the TeraStation’s hostname and configure the IP
address so that it has a new static IP address.
9
Power on the main TeraStation. To configure the UPS sync on the backup TeraStation, configure the settings
here. Otherwise, skip to the next step.
To synchronize with the UPS device connected to the main TeraStation, follow the procedure below on the
backup TeraStation.
a. Click
Management
.
b. Click the settings icon (
) to the right of “Power Management”.
114
Chapter 5 Backup
Summary of Contents for TeraStation 6000 Series
