Conditions
Corrective Actions
RAID 10 has been configured.
1
Refer to the
“Selecting the Action on the Confirmation Screen”
section above on how to access the confirmation screen.
2
Select “Shut down the TeraStation and reconnect the drives” and
click
Execute
.
3
After the TeraStation shuts down, confirm that all drives have
been inserted properly.
4
Press the power button to power on the TeraStation.
5
Log in to Settings and make sure the confirmation screen doesn’t
appear.
Multiple arrays have been configured.
Configuring a Hot Spare
If you have a hot spare configured and an array fails, the TeraStation immediately switches over to the hot spare. To
use a hot spare, you need an extra drive that’s not part of any array and a RAID 1 or RAID 5 array.
Notes:
• All data on the hot spare drive is deleted when it is configured as a hot spare and again when it changes from a
spare to a drive in the array.
• A hot spare cannot be configured for TeraStation models with only two-drives included.
1
From Settings, click
Storage
.
2
Click the settings icon (
) to the right of “RAID”.
3
Choose a RAID array.
50
Chapter 4 Storage Management
Summary of Contents for TeraStation 6000 Series
