Dismount the USB drive before unplugging it. Refer to the
section in chapter 4 for the
procedure on dismounting drives.
Resetting the Administrator Password
If you forget the admin username or password and cannot log in to Settings, or wrong network settings are
configured and Settings becomes inaccessible, initialize these settings by holding down the init button (refer to the
TeraStation diagram in chapter 1) on the front panel for three seconds. Normally this will reset the admin username
and password, IP address settings other than Wake-on-LAN, port trunking, SSL, and security port settings to their
factory default values.
This button can be disabled in Settings; to do so, navigate to
Management
>
Restore/Erase
>
Edit
under “Init Button
Settings”, then select “Keep current admin username and password” and click
OK
.
Logs
Displaying TeraStation’s Logs
Follow the procedure to check the TeraStation’s logs.
1
From Settings, click
Management
.
2
Click the settings icon (
) to the right of “Logs”.
3
Select a log to view.
The file access log stores file access events that occurred on the internal drives. File access on USB drives are
not logged.
178
Chapter 7 Advanced Features
Summary of Contents for TeraStation 6000 Series
