manualshive.com logo in svg

Buffalo TeraStation 6000 Series, User Manual

Share
Download
Buffalo TeraStation 6000 Series User Manual Download Page 223

LCD Message

Description

Corrective Action

I26 Initializing 
Settings...

Initializing all settings.

-

I27 Checking USB 
Drive 

x

...

Checking the USB drive.

-

I28 Formatting USB 
Drive 

x

...

Formatting the USB drive.

-

I31 Push Func to Use 
New Drive 

x

Displays when pressing the function 
button to rebuild the RAID array after 
replacing the drive.

Press the function button to rebuild the 
RAID array.

I32 New Drive 

x

 

Detected

Displays after replacing the drive when the 
RAID array needs to be rebuilt in Settings 
or formatting is necessary.

From Settings, either rebuild the RAID 
array or format the drive.

I33 Replication 
Failure

An error occurred in replication, or 
synchronization between the main 
TeraStation and the backup TeraStation 
failed during failover configuration.

From Settings, navigate to 

Backup

 > 

Replication

 and click 

Resync

 to execute 

resynchronization.
If you configured the subfolders’ access 
restrictions to be inherited to the 
replication or failover destinations, disable 
them or change the destinations.
If the error is displayed again, contact 
Buffalo technical support for assistance.

I37 Recovering 
System...

Settings initialization in progress.

-

I38 Recovery 
Finished

Settings initialization is completed.

-

I40 All Data Will Be 
Deleted

Beginning settings initialization. All data 
on the drive 1 will be deleted.

-

I41 Push Func to 
Start Recovery

Press the function button on the front to 
start the settings initialization process.

-

I42 Preparing 
Recovery

Preparing to start the settings initialization 
process.

-

I43 Unsupported 
Hardware

The TeraStation was started from the 
USB initialization device, but the settings 
cannot be initialized from this USB 
initialization device.

-

I44 Drive 1 Not 
Found

Initialization from the USB initialization 
device was initiated, but drive 1 was not 
detected.

Make sure that drive 1 is present and fully 
inserted in its slot.

I45 Recovery Failure

Initialization failed.

-

I46 Migrating RAID 
Array 

x

...

Data migration or conversion (RAID 
migration) is in progress.

Note: 

Do not turn off the TeraStation’s 

power.

-

I47 Don’t Power Off 
System!

Data migration or conversion (RAID 
migration) is in progress.

Note: 

Do not turn off the TeraStation’s 

power.

-

I48 Push Func to 
Start Failover

This TeraStation is ready to become the 
failover backup for the main TeraStation.

Press and hold the function button on the 
front of the target TeraStation until it stops 
beeping to accept failover backup status.

222

Chapter 10 Appendix

Summary of Contents for TeraStation 6000 Series



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands