Buffalo TeraStation 6000 Series, User Manual

Page: 212 / 226

Name Description
Buffalo NAS device
name
Browse Shares Opens the Buffalo NAS device’s shared folders.
Settings Opens Settings for the Buffalo NAS device.
Properties
Opens the properties page that lets you configure the
Buffalo NAS device’s IP address or open Settings.
Map Share
Assigns the Buffalo NAS device’s shared folder as a network
drive.
Disconnect Share Unmaps the network drive.
Create Shortcut
Creates a desktop shortcut to the Buffalo NAS device’s
shared folders.
I’m here Causes your Buffalo NAS device to beep.
Refresh Searches for the Buffalo NAS devices on the network again.
Open NAS Navigator2 Opens the NAS Navigator2 window.
Exit Exits NAS Navigator2.
The following menus may be accessed from the Buffalo NAS device’s properties page.
Name Description
Configuration Click Settings to open the configuration interface.
IP Address
Select the “Use DHCP” checkbox to assign an IP address from the DHCP server
automatically. If there is no DHCP server on the network, you cannot use this
function. Select the “Renew IP address” checkbox to obtain an IP address from the
DHCP server. You can manually enter a static IP address, subnet mask, and default
gateway.
Mounting as a Network Drive
You can easily assign a shared folder as a network drive using NAS Navigator2.
211
Chapter 9 Utilities