![Buffalo TeraStation 6000 Series User Manual Download Page 163](http://html1.mh-extra.com/html/buffalo/terastation-6000-series/terastation-6000-series_user-manual_2827407163.webp)
6
Click the settings icon (
) to the right of “Power Management”.
7
Click
Edit
.
8
Configure the desired settings, then click
OK
.
Notes:
• If the TeraStation is connected directly to a UPS, select “Sync with UPS connected to this TeraStation”. If a different
Buffalo NAS device is connected to the UPS, select “Sync with UPS connected to another Buffalo NAS device on
the same network”. After making this selection, enter the IP address of the Buffalo NAS device that will be the
sync source into “Other Buffalo NAS’s IP Address”.
• If you don’t want to connect any UPS devices, select “Do not synchronize with UPS” and the operation for if a
power supply failure occurs. If “Use last state” at “AC Power Recovery” is selected, the TeraStation will revert to the
state before the power supply failure occurs. If “Stay off” is selected, the TeraStation will remain off even after the
TeraStation shuts down due to the power supply failure.
• When the TeraStation restarts after an automatic shutdown such as from a power outage or power supply issue,
verify that external power has been restored. If the TeraStation is turned on while it is still running on the UPS and
external power has not been restored, the automatic shutdown will not be performed, even after the specified
time elapses.
• If the power supply from the UPS to the TeraStation stops and restarts when UPS recovery is enabled, the
TeraStation will automatically restart.
162
Chapter 7 Advanced Features
Summary of Contents for TeraStation 6000 Series
