3Com S7906E - Switch, Configuration Manual

Page: 785 / 2621

1-16
z
For information about the VPN extension application, refer to MPLS L3VPN Configuration in the
MPLS Volume .
z
For information about the IPv6 extension application, refer to IPv6 BGP Configuration in the IP
Routing Volume .
z
This chapter gives no detailed commands related to any specific extension application in MP-BGP
address family view.
Protocols and Standards
z
RFC1771: A Border Gateway Protocol 4 (BGP-4)
z
RFC2858: Multiprotocol Extensions for BGP-4
z
RFC3392: Capabilities Advertisement with BGP-4
z
RFC2918: Route Refresh Capability for BGP-4
z
RFC2439: BGP Route Flap Damping
z
RFC1997: BGP Communities Attribute
z
RFC2796: BGP Route Reflection
z
RFC3065: Autonomous System Confederations for BGP
z
RFC4271: A Border Gateway Protocol 4 (BGP-4)
z
RFC5291: Outbound Route Filtering Capability for BGP-4
z
RFC5292: Address-Prefix-Based Outbound Route Filter for BGP-4
z
draft-ietf-idr-restart-08: Graceful Restart Mechanism for BGP
BGP Configuration Task List
Complete the following tasks to configure BGP:
Task Remarks
Creating a BGP Connection Required
Specifying the Source Interface for TCP
Connections
Optional
Configuring BGP Basic
Functions
Allowing Establishment of eBGP Connection
to a Non Directly Connected Peer/Peer
Group
Optional
Injecting a Local Network
Configuring BGP Route Redistribution
Required to choose
either.
Controlling Route
Generation
Enabling Default Route Redistribution into
BGP
Optional