3Com S7906E - Switch, Configuration Manual

Page: 2116 / 2621

1-43
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID : 1 Adver Timer : 500
Admin Status : Up State : Backup
Config Pri : 100 Running Pri : 100
Preempt Mode : Yes Delay Time : 5
Auth Type : Simple Key : hello
Virtual IP : FE80::10
1::10
Master IP : FE80::1
The above information indicates that in VRRP group 1 Switch A is the master, Switch B is the backup
and packets sent from Host A to Host B are forwarded by Switch A.
If interface VLAN-interface 3 on Switch A is not available, you can still ping Host B successfully on Host
A. You can use the display vrrp ipv6 verbose command to view the detailed information of the VRRP
group.
# If interface VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group 1 on
Switch A is displayed.
[SwitchA-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID : 1 Adver Timer : 500
Admin Status : Up State : Backup
Config Pri : 110 Running Pri : 80
Preempt Mode : Yes Delay Time : 5
Auth Type : Simple Key : hello
Virtual IP : FE80::10
1::10
Master IP : FE80::2
VRRP Track Information:
Track Interface: Vlan3 State : Down Pri Reduced : 30
# If interface VLAN-interface 3 on Switch A is not available, the detailed information of VRRP group 1 on
Switch B is displayed.
[SwitchB-Vlan-interface2] display vrrp ipv6 verbose
IPv6 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface Vlan-interface2
VRID : 1 Adver Timer : 500
Admin Status : Up State : Master
Config Pri : 100 Running Pri : 100