3Com S7906E - Switch, Configuration Manual

Page: 1873 / 2621

2-2
No. Attribute Description
40 Acct-Status-Type
Type of the Accounting-Request packet, which can be:
z
1: Start
z
2: Stop
z
3: Interium-Update
z
4: Reset-Charge
z
7: Accounting-On (Defined in 3GPP, the
3rd Generation Partnership
Project )
z
8: Accounting-Off (Defined in 3GPP)
z
9-14: Reserved for tunnel accounting
z
15: Reserved for failed
45 Acct-Authentic
Authentication method used by the user, which can be:
z
1: RADIUS
z
2: Local
z
3: Remote
60 CHAP-Challenge
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication
61 NAS-Port-Type
Type of the physical port of the NAS that is authenticating the user, which
can be:
z
15: Ethernet
z
16: Any type of ADSL
z
17: Cable (with cable for cable TV)
z
201: VLAN
z
202: ATM
If the port is an ATM or Ethernet one and VLANs are implemented on it,
the value of this attribute is 201.
79 EAP-Message
Used for encapsulating EAP packets to allow the NAS to authenticate
dial-in users via EAP without having to understand the EAP protocol
80
Message-Authent
icator
Used for authentication and checking of authentication packets to
prevent spoofing Access-Requests. This attribute is used when RADIUS
supports EAP authentication.
87 NAS-Port-Id String for describing the port of the NAS that is authenticating the user