3Com S7906E - Switch, Configuration Manual

Page: 1562 / 2621

1-47
To do… Use the command… Remarks
Clear the route flap dampening
information of a VPN instance
reset bgp vpn-instance
vpn-instance-name
dampening
[ network-address
[ mask | mask-length ]
Available in user view
Clear route flap history
information about a BGP peer
of a VPN instance
reset bgp vpn-instance
vpn-instance-name ip-address
flap-info
reset bgp vpn-instance
vpn-instance-name flap-info
[ ip-address [ mask |
mask-length ] | as-path-acl
as-path-acl-number | regexp
as-path-regexp ]
Available in user view
For commands to display information about a routing table, refer to IP Routing Table Commands in the
IP Routing Volume .
MPLS L3VPN Configuration Examples
Example for Configuring MPLS L3VPNs
Network requirements
z
CE 1 and CE 3 belong to VPN 1, while CE 2 and CE 4 belong to VPN 2.
z
VPN 1 uses VPN target attributes 111:1, while VPN 2 uses VPN target attributes 222:2. Users of
different VPNs cannot access each other.
z
PEs and the P device support MPLS.