3Com S7906E - Switch, Configuration Manual

Page: 1756 / 2621

4-8
To do… Use the command… Remarks
Enter
interface
view
interface interface-type
interface-number
Enter
interface
view or
port group
view
Enter port
group
view
port-group manual port-group-name
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Configure the inbound
or outbound line rate for
the interface/port group qos lr outbound cir
committed-information-rate
[ cbs
committed-burst-size ]
Required
z
On SC, SA, and EA LPUs, the
granularity of line rate is 64
kbps.
z
On SD and EB LPUs, the
granularity of line rate is 8
kbps.
Display line rate
configuration
information on the
interface/all interfaces
display qos lr interface
[ interface-type interface-number ]
Available in any view
Configuration Example
Limit the outbound line rate of GigabitEthernet 2/0/1 to 512 kbps.
# Enter system view.
<Sysname> system-view
# Enter interface view.
[Sysname] interface gigabitethernet 2/0/1
# Limit the outbound line rate of GigabitEthernet 2/0/1 to 512 kbps.
[Sysname-GigabitEthernet2/0/1] qos lr outbound cir 512
Displaying and Maintaining Traffic Policing, GTS, and Line Rate
On the S7900E series switches, you can configure traffic policing in policy-based approach. For related
displaying and maintaining commands, refer to Displaying and Maintaining QoS Policies .
To do… Use the command… Remarks
Display interface GTS
configuration information
display qos gts interface
[ interface-type
interface-number ]
Available in any view
Display interface line rate
configuration information
display qos lr interface
[ interface-type
interface-number ]
Available in any view