3Com S7906E - Switch, Configuration Manual

Page: 2615 / 2621

1-6
Configuring the ACFP Server (Switch)
Enabling the ACFP Server
Follow these steps to enable the ACFP server:
To do… Use the command… Remarks
Enter system view system-view —
Enable the ACFP server acfp server enable
Required
Disabled by default
Enabling the ACFP Trap Function
To make ACFP work normally, you must enable the device to send traps of the ACFP module.
After the trap function on the ACFP module is enabled, the ACFP module will generate traps to report
important events of the module. The levels of the ACFP traps are described in Table 1-1 .
Table 1-1 ACFP trap message level
Trap message Level
Context ID type changed notifications
ACFP client registration notifications
ACFP client deregistration notifications
ACSEI detects that ACFP client had no response warnings
ACFP server does not support the working mode of the ACFP
client
errors
Expiration period of ACFP collaboration policy changed notifications
ACFP collaboration rules are created informational
ACFP collaboration rules are removed informational
ACFP collaboration rules failed errors
Expiration period of ACFP collaboration policy timed out notifications
The generated traps will be sent to the information center of the device. With the parameters for the
information center set, the output rules for traps (that is, whether the traps are allowed to be output and
the output destinations) are decided. For the configuration of the parameters for the information center,
refer to Information Center Configuration in the System Volume .
Follow these steps to enable the ACFP trap function:
To do… Use the command… Remarks
Enter system view system-view —
Enable the trap function of the
ACFP module snmp-agent trap enable acfp
[ client | policy | rule | server ]
Optional
Enabled by default