3Com S7906E - Switch, Configuration Manual

Page: 2570 / 2621

1-6
To do… Use the command… Remarks
Enter system view
system-view
—
Install the patches in one step patch install patch-location Required
z
The patch matches the card type and software version.
z
The patch install command changes the patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.
Step-by-Step Patch Installation
Step-by-Step Patch Installation Task List
Task Remarks
Configuring the Patch File Location Optional
Loading a Patch File Required
Activating Patches Required
Confirming Running Patches Optional
Configuring the Patch File Location
If you save the patch files to other storage media except the flash on the device, you need to specify the
directory where the patch files locate with the patch-location argument. Then the system loads the
appropriate patch files from the specified directory. If the device has only one storage medium, you do
not need to execute this command.
Follow these steps to configure the patch file location:
To do… Use the command… Remarks
Enter system view system-view —
Configure the patch file location patch location patch-location
Optional
flash: by default