3Com S7906E - Switch, Configuration Manual

Page: 256 / 2621

1-5
Creating a Local Mirroring Group
Follow these steps to create a local mirroring group:
To do… Use the command… Remarks
Enter system view system-view —
Create a local mirroring group mirroring-group group-id local Required
A local mirroring group takes effect only after you configure a monitor port and mirroring port for it.
Configuring Mirroring Ports for the Local Mirroring Group
You can configure a list of mirroring ports for a mirroring group at a time in system view, or assign only
the current port to it as a mirroring port in interface view. To assign multiple ports to the mirroring group
as mirroring ports in interface view, repeat the step.
Configuring mirroring ports in system view
Follow these steps to configure mirroring ports for a local mirroring group in system view:
To do… Use the command… Remarks
Enter system view system-view —
Configure mirroring ports
mirroring-group group-id
mirroring-port
mirroring-port-list
{ both |
inbound | outbound }
Required
By default, no mirroring port is
configured for a mirroring
group.
Configuring a mirroring port in interface view
Follow these steps to configure a mirroring port for a local mirroring group in interface view:
To do… Use the command… Remarks
Enter system view system-view —
Enter interface view
interface interface-type
interface-number
—
Configure the current port as a
mirroring port
[ mirroring-group group-id ]
mirroring-port { both |
inbound | outbound }
Required
By default, a port does not
serve as a mirroring port for any
mirroring group.
A mirroring group can contain multiple mirroring ports.