3Com S7906E - Switch, Configuration Manual

Page: 2289 / 2621

2-4
Configuration Description
Baud rate speed speed-value
Optional
The default baud rate is 9,600
bps.
Check mode
parity { even | mark |
none | odd | space }
Optional
By default, the check mode of
the Console port is set to
“none”, which means no check
bit.
Stop bits stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a
Console port is 1.
Console port
configuration
Data bits databits { 5 | 6 | 7 | 8 }
Optional
The default data bits of a
Console port is 8.
AUX user
interface
configuration
Configure the
command level
available to the
users logging in to
the AUX user
interface
user privilege level level
Optional
By default, commands of level 3
are available to the users
logging in to the AUX user
interface.
Make terminal
services available
shell
Optional
By default, terminal services
are available in all user
interfaces
Set the maximum
number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen can
contain up to 24 lines.
Set history
command buffer
size
history-command
max-size value
Optional
By default, the history
command buffer can contain up
to 10 commands.
Terminal
configuration
Set the timeout
time of a user
interface
idle-timeout minutes
[ seconds ]
Optional
The default timeout time is 10
minutes.
Changing of Console port configuration terminates the connection to the Console port. To establish the
connection again, you need to modify the configuration of the termination emulation utility running on
your PC accordingly. Refer to Setting Up the Connection to the Console Port for details.