3Com S7906E - Switch, Configuration Manual

Page: 2356 / 2621

1-1
1
Device Management
The S7900E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7900E series can be connected together to form a distributed IRF device. If an
S7900E series is not in any IRF, it operates as a distributed device; if the S7900E series is in an IRF, it
operates as a distributed IRF device. For introduction of IRF, refer to IRF Configuration in the System
Volume.
When configuring device management, go to these sections for information you are interested in:
z
Device Management Overview
z
Device Management Configuration Task List
z
Configuring the Exception Handling Method
z
Rebooting a Device
z
Configuring the Scheduled Automatic Execution Function
z
Upgrading Device Software
z
Configuring Temperature Alarm Thresholds for a board
z
Clearing the 16-bit Interface Indexes Not Used in the Current System
z
Configuring the System Load Sharing Function
z
Enabling Active/Standby Mode for Service Ports on SRPUs
z
Configuring the Traffic Forwarding Mode of SRPUs
z
Configuring the Working Mode of LPUs
z
Enabling the Port Down Function Globally
z
Enabling Expansion Memory Data Recovery Function on a board
z
Identifying and Diagnosing Pluggable Transceivers
z
Displaying and Maintaining Device Management Configuration
z
Device Management Configuration Examples
Device Management Overview
Through the device management function, you can view the current working state of a device, configure
running parameters, and perform daily device maintenance and management.