3Com S7906E - Switch, Configuration Manual

Page: 2476 / 2621

1-3
PoE Configuration Task List
You can configure a PoE interface in either of the following two ways:
z
Through command lines.
z
Through configuring the PoE profile and applying the PoE profile to the PoE interface.
When configuring a single PoE interface, you can use command lines; when you configure PoE
interfaces in batches, you can use the PoE profile. For a PoE configuration parameter of a PoE
interface, you can only select one mode (including modification and removal of a PoE interface).
Complete these tasks to configure PoE:
Task Remarks
Enabling PoE for a PSE Required
Enabling PoE
Enabling PoE for a PoE
Interface
Required
Detecting PDs
Enabling the PSE to Detect
Nonstandard PDs
Optional
Configuring the Maximum
PoE Power
Optional
Configuring the Maximum
PSE Power
Optional Configuring the PoE Power
Configuring the Maximum
PoE Interface Power
Optional
Configuring PSE Power
Management
Optional
Configuring PoE Power
Management
Configuring PoE Interface
Power Management
Optional
Configuring PoE Power
Supply Monitoring
Optional
Configuring PSE Power
Monitoring
Optional
Configuring the PoE
Monitoring Function
Monitoring PD
Optional
The device automatically monitors
PDs when supplying power to them,
so no configuration is required.
Configuring PoE Profile Optional
Configuring PoE Interface
through PoE Profile
Applying PoE Profile Optional
Upgrading PSE Processing Software in Service Optional