3Com S7906E - Switch, Configuration Manual

Page: 1040 / 2621

1-18
Configuring PIM-SM
PIM-SM Configuration Task List
Complete these tasks to configure PIM-SM:
Task Remarks
Configuring PIM-SM Required
Configuring a static RP Optional
Configuring a C-RP Optional
Enabling auto-RP Optional
Configuring an RP
Configuring C-RP timers globally Optional
Configuring a C-BSR Optional
Configuring a PIM domain border
Optional
Configuring global C-BSR parameters Optional
Configuring a BSR
Configuring C-BSR timers Optional
Enabling administrative scoping Optional
Configuring an admin-scope zone boundary Optional
Configuring Administrative Scoping
Configuring C-BSRs for each admin-scope
zone and the global-scope zone
Optional
Configuring Multicast Source Registration Optional
Disabling SPT Switchover Optional
Configuring PIM Common Features Optional
Configuration Prerequisites
Before configuring PIM-SM, complete the following task:
z
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
Before configuring PIM-SM, prepare the following data:
z
The IP address of a static RP and an ACL rule defining the range of multicast groups to be served
by the static RP
z
C-RP priority and an ACL rule defining the range of multicast groups to be served by each C-RP
z
A legal C-RP address range and an ACL rule defining the range of multicast groups to be served
z
C-RP-Adv interval
z
C-RP timeout
z
C-BSR priority
z
Hash mask length
z
An ACL rule defining a legal BSR address range