3Com S7906E - Switch, Configuration Manual

Page: 1296 / 2621

1-17
Configuring IPv6 PIM-SM
IPv6 PIM-SM Configuration Task List
Complete these tasks to configure IPv6 PIM-SM:
Task Remarks
Enabling IPv6 PIM-SM Required
Configuring a static RP Optional
Configuring a C-RP Optional
Enabling embedded RP Optional
Configuring an RP
Configuring C-RP timers globally Optional
Configuring a C-BSR Optional
Configuring an IPv6 PIM domain border Optional
Configuring C-BSR parameters globally Optional
Configuring a BSR
Configuring C-BSR timers Optional
Configuring IPv6 Multicast Source Registration Optional
Configuring SPT Switchover Optional
Configuring IPv6 PIM Common Features Optional
Configuration Prerequisites
Before configuring IPv6 PIM-SM, complete the following task:
z
Configure any IPv6 unicast routing protocol so that all devices in the domain are interoperable at
the network layer.
Before configuring IPv6 PIM-SM, prepare the following data:
z
The IP address of a static RP and an ACL rule defining the range of IPv6 multicast groups to be
served by the static RP
z
C-RP priority and an ACL rule defining the range of IPv6 multicast groups to be served by each
C-RP
z
A legal C-RP address range and an ACL rule defining the range of IPv6 multicast groups to be
served
z
C-RP-Adv interval
z
C-RP timeout
z
C-BSR priority
z
Hash mask length
z
An IPv6 ACL rule defining a legal BSR address range
z
BS period
z
BS timeout
z
An IPv6 ACL rule for register message filtering
z
Register suppression time
z
Register probe time
z
The IPv6 ACL rule, and sequencing rule for disabling an SPT switchover