3Com S7906E - Switch, Configuration Manual

Page: 301 / 2621

3-1
3
ONU Remote Management Configuration
When an S7900E switch is working as an OLT device, you can configure a variety of functions on its
ONU ports so that you can manage the connected ONUs remotely. This chapter describes only the
functions and commands developed specially for ONU ports on such an S7900E switch. Other function
configurations of ONU ports are basically the same as those of the Ethernet ports on an S7900E switch.
For details, see
ONU Port Features and Restrictions .
ONU Configuration
Currently, the H3C ONUs for the S7900E series switches fall into three types:
ET704 series ONUs (For details, see
H3C ET704 Series EPON ONUs User Manual
.)
S3100 series ONUs (For details, see
H3C S3100 Series Ethernet Switches Quick Start.
)
EC series ONUs (For details, see
H3C EC1001 Video Encoder User Manual
.)
Support for OLT remote management commands varies with ONUs. For details, see the sections
describing the supported configuration functions in ONU device user manuals. The following table lists
the ONU remote management functions supported by an S7900E switch working as an OLT device.
ONU Configuration Task List
Complete the following tasks to configure an ONU:
Task Remarks
Creating an ONU Port Required
Binding an ONU with an ONU Port Required
Configuring Batch ONU Binding and Automatic ONU Binding Optional
Configuring the Management VLAN of the ONU
Optional
For H3C ONUs only
Configure the ONU Bandwidth Allocation and Related Parameters
Optional
For H3C ONUs only
Enabling Related Protocols on an ONU
Optional
For H3C ONUs only
Configuring the Multicast Mode of the ONU Optional
Configuring the Link Type of an ONU Port Optional
Other ONU
Enabling FEC Optional