3Com S7906E - Switch, Configuration Manual

Page: 1108 / 2621

1-25
[SwitchE-msdp] peer 192.168.3.1 connect-interface vlan-interface 102
[SwitchE-msdp] static-rpf-peer 192.168.3.1 rp-policy list-c
[SwitchE-msdp] quit
5) Verify the configuration
Carry out the display bgp peer command to view the BGP peering relationships between the switches.
If the command gives no output information, a BGP peering relationship has not been established
between the switches.
When the multicast source in PIM-SM 1 (Source 1) and the multicast source in PIM-SM 2 (Source 2)
send multicast information, receivers in PIM-SM 1 and PIM-SM 3 can receive the multicast data. You
can use the display msdp brief command to view the brief information of MSDP peering relationships
between the switches. For example:
# View the brief MSDP peer information on Switch B.
[SwitchB] display msdp brief
MSDP Peer Brief Information
Configured Up Listen Connect Shutdown Down
2 2 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.3.2 Up 01:07:08 ? 8 0
192.168.1.2 Up 00:16:39 ? 13 0
# View the brief MSDP peer information on Switch C.
[SwitchC] display msdp brief
MSDP Peer Brief Information
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.1.1 Up 01:07:09 ? 8 0
# View the brief MSDP peer information on Switch E.
[SwitchE] display msdp brief
MSDP Peer Brief Information
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
192.168.3.1 Up 00:16:40 ? 13 0
Anycast RP Configuration
Network requirements
z
The PIM-SM domain has multiple multicast sources and receivers. OSPF runs within the domain to
provide unicast routes.