3Com S7906E - Switch, Configuration Manual

Page: 552 / 2621

1-8
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
# Download the startup file newest.app from PC to Device.
z
Download the startup file newest.app from PC to the root directory of the storage medium on the
AMB.
[ftp] get newest.app
z
Download the startup file newest.app from PC to the root directory of the storage medium on the
SMB (in slot 1).
[ftp] get newest.app slot1#flash:/newest.app
# Upload the configuration file config.cfg of Device to the server for backup.
[ftp] ascii
200 Type set to A.
[ftp] put config.cfg back-config.cfg
227 Entering Passive Mode (10,1,1,1,4,2).
125 ASCII mode data connection already open, transfer starting for /config.cfg.
226 Transfer complete.
FTP: 3494 byte(s) sent in 5.646 second(s), 618.00 byte(s)/sec.
[ftp] bye
# Specify newest.app as the main startup file to be used at the next startup.
z
Specify newest.app as the main startup file to be used at the next startup for the AMB.
<Sysname> boot-loader file newest.app slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 0!
z
Specify newest.app as the main startup file to be used at the next startup for the SMB (in slot 1).
<Sysname> boot-loader file slot1#flash:/newest.app slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot 1!
# Reboot the device, and the startup file is updated at the system reboot.
<Sysname> reboot
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader command, refer to Device Management Commands in the System Volume .