3Com S7906E - Switch, Configuration Manual

Page: 728 / 2621

1-17
Task Remarks
Configuring Neighbor Relationship Authentication Optional
Configuring Area Authentication Optional
Configuring IS-IS
Authentication
Configuring Routing Domain Authentication Optional
Configuring a Static System ID to Host Name Mapping Optional Configuring
System ID to Host
Name Mappings
Configuring Dynamic System ID to Host Name Mapping Optional
Configuring IS-IS GR Optional
Enabling the Logging of Neighbor State Changes Optional
Enabling IS-IS SNMP Trap Optional
Binding an IS-IS Process with MIBs Optional
Configuring BFD for IS-IS Optional
Configuring IS-IS Basic Functions
Configuration Prerequisites
Before the configuration, accomplish the following tasks:
z
Configure the link layer protocol.
z
Configure an IP address for each interface, and make sure all neighboring nodes are reachable to
each other at the network layer.
Enabling IS-IS
Follow these steps to enable IS-IS:
To do… Use the command… Remarks
Enter system view
system-view
––
Enable the IS-IS routing
process and enter its view
isis [ process-id ]
[ vpn-instance
vpn-instance-name ]
Required
Not enabled by default
Assign a network entity title
(NET)
network-entity net
Required
Not assigned by default
Return to system view quit ––
Enter interface view
interface interface-type
interface-number
––
Enable an IS-IS process on the
interface
isis enable [ process-id ]
Required
Disabled by default
Configuring the IS Level and Circuit Level
If only one area is available, it is recommended that: