3Com S7906E - Switch, Configuration Manual

Page: 1477 / 2621

1-43
Local Discr: 4 Remote Discr: 0
Source IP: 1.1.1.9 Destination IP: 3.3.3.9
Session State: Up Interface: LoopBack0
Min Trans Inter: 400ms Act Trans Inter: 1000ms
Min Recv Inter: 400ms Act Detect Inter: 3000ms
Running Up for: 00:00:01 Auth mode: None
Connect Type: Indirect Board Num: 6
Protocol: MFW/LDP
Diag Info: No Diagnostic
# Use the
display vpls connection vsi vpna
command to display the status of the path between
Switch A and Switch B. The output shows that the path is up.
<SwitchA> display vpls connection vsi vpna
Total 2 connection(s),
connection(s): 1 up, 1 block, 0 down
VSI Name: vpna Signaling: ldp
VsiID VsiType PeerAddr InLabel OutLabel LinkID VCState
100 vlan 2.2.2.9 134312 138882 1 up
100 vlan 3.3.3.9 134216 140476 2 block
# Use the
display vpls fib vsi vpna verbose
command to display the forwarding table information of
the VPLS instance of Switch A.
[SwitchA] display vpls fib vsi vpna verbose
VSI Name: vpna VSI Index: 0
**Link ID : 1
Role : Primary
State : Active
In Label : 134312
Out Label : 138882
TnlType : LDP-LSP
MTU : 1500
Tunnel ID : 0x1130214
Next Hop : 12.1.1.2
Out IfIndex : 61997067
**Link ID : 2
Role : Backup
State : Standy
In Label : 134216
Out Label : 140476
TnlType : LDP-LSP
MTU : 1500
Tunnel ID : 0x1130215
Next Hop : 13.1.1.3
Out IfIndex : 61997068