3Com S7906E - Switch, Configuration Manual

Page: 2619 / 2621

1-2
An ACSEI server can register multiple ACSEI clients. The maximum number of ACSEI clients that an
ACSEI server allows to register is 10.
ACSEI Timers
An ACSEI server uses two timers, the clock synchronization timer and the monitoring timer.
z
The clock synchronization timer is used to periodically trigger the ACSEI server to send clock
synchronization advertisements to ACSEI clients. You can set this timer through command lines.
z
The monitoring timer is used to periodically trigger the ACSEI server to send monitoring requests to
ACSEI clients. You can set this timer through command lines.
An ACSEI client starts two timers, the registration timer and the monitoring timer.
z
The registration timer is used to periodically trigger the ACSEI client to multicast registration
requests (with the multicast MAC address being
010F-E200-0021). You cannot set this timer.
z
The monitoring timer is used to periodically trigger the ACSEI client to send monitoring requests to
the ACSEI server. You cannot set this timer.
ACSEI Startup and Running
ACSEI starts up and runs in the following procedures:
1) Run the ACSEI client application to enable ACSEI client.
2) Start up the device and enable the ACSEI server function on it.
3) The ACSEI client multicasts registration requests.
4) After the ACSEI server receives a valid registration request, it negotiates parameters with the
ACSEI client and establishes connection with the client if the negotiation succeeds.
5) The ACSEI server and the ACSEI client mutually monitor the connection.
6) If detecting the disconnection of the ACSEI client, the ACFP server will remove the configuration
and policies associated with the client.
ACSEI Server Configuration (Switch)
The section covers these topics:
z
Enabling ACSEI Server
z
Configuring the Clock Synchronization Timer
z
Configuring the Monitoring Timer
z
Closing an ACSEI Client
z
Restarting an ACSEI Client
z
Displaying and Maintaining ACSEI Server
Enabling ACSEI Server
Follow these steps to enable ACSEI server:
To do… Use the command… Remarks
Enter system view system-view —
Enable ACSEI server acsei server enable
Required
Disabled by default.