3Com S7906E - Switch, Configuration Manual

Page: 1092 / 2621

1-9
To do... Use the command... Remarks
Enter system view
system-view
—
Enable IP multicast routing multicast routing-enable
Required
Disabled by default
Enable MSDP and enter public
instance MSDP view
msdp
Required
Disabled by default
Enabling MSDP in a VPN instance
To do... Use the command... Remarks
Enter system view system-view —
Create a VPN instance and
enter VPN instance view ip vpn-instance
vpn-instance-name
—
Configure a route-distinguisher
(RD) for the VPN instance route-distinguisher
route-distinguisher
Required
No RD is configured by default.
Enable IP multicast routing
multicast routing-enable
Required
Disabled by default
Return to system view
quit
—
Enable MSDP and enter VPN
instance MSDP view msdp vpn-instance
vpn-instance-name
Required
Disabled by default
z
For details about the ip vpn-instance and route-distinguisher commands, see MPLS L3VPN
Commands in the MPLS Volume .
z
For details about the multicast routing-table command, see Multicast Routing and Forwarding
Commands in the IP Multicast Volume .
Creating an MSDP Peer Connection
An MSDP peering relationship is identified by an address pair, namely the address of the local MSDP
peer and that of the remote MSDP peer. An MSDP peer connection must be created on both devices
that are a pair of MSDP peers.
Follow these steps to create an MSDP peer connection:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter public instance MSDP
view or VPN instance MSDP
view
msdp [ vpn-instance
vpn-instance-name ]
—