![background image](http://html1.mh-extra.com/html/zeiss/lightsheet-z-1/lightsheet-z-1_operating-manual_927692248.webp)
Carl Zeiss
Left Tool Area and Hardware Control Tools
Lightsheet Z.1
78
000000-1790-528
02/2013
With the
Range
slider you can control which part of the dynamic range should be used by moving the
restriction sliders on both sides. The
Range
slider represents simplified low grey values on the left side
and high grey values on the right side. On the left hand side, the resulting live image is displayed.
The middle section gives information on the current step in the process (numbered 1 to 4) and describes
which task needs to be done by the user. The lower section holds the buttons
Previous
to go one step
back,
Next
to proceed to the next step and
Cancel
to end the process without result.
The
Previous
button is inactive in the first step and the
Next
button is replaced by the
Finish
button in
the last step.
Step 1: Adjust image brightness and position
Position your sample with the
Specimen Navigator
tool tab (Fig. 120). The middle of the sample should
be in focus. Use within the
Image Settings
tool tab the
Light Intensity
slider or input box with arrows
and the
Range
sliders to adjust the brightness of the live image on the left hand side.
Fig. 120
Multiview-Quick Setup, Step 1
Содержание Lightsheet Z.1
Страница 1: ...Lightsheet Z 1 Operating Manual February 2013 ZEN 2012 black edition ...
Страница 4: ......
Страница 170: ......
Страница 427: ...Lightsheet Z 1 Overview ...