![background image](http://html1.mh-extra.com/html/zeiss/lightsheet-z-1/lightsheet-z-1_operating-manual_927692179.webp)
Lightsheet Z.1
Startup and Shutdown of the System
Carl Zeiss
02/2013
000000-1790-528
9
When ZEN software is started for the first time, the
positioning units needs to be initialized. All doors
of the system must be closed and no sample can
be present in the system. The boot process will be
interrupted and a message (Fig. 7) will state to
remove the sample; do so if necessary and press
OK
to continue with the boot process.
−
Offline/Demo
for data analysis and simulation.
Offline/Demo
reads the active hardware database
and simulates the respective hardware. This button
is only available after opening the
Boot Status
display by clicking the little arrow left of the text
"Boot Status" This option should be chosen when
working at an offline station and if you want to
test functionalities of the system. The progress of
the boot process will be displayed by the blue time
tab. The single components will be listed, which
are initialized during the boot process. Note that
the software will not control the hardware in this
mode.
−
Image Processing
for data analysis only. This
mode ignores the hardware and activates only data
handling and image processing functionality to
analyze stored images. Note that only those
software tools will be displayed that are needed for
processing and analysis of the data. No hardware
control tools will be shown.
−
Cancel
to abort the booting process and to leave
the dialog. Note that the
Cancel
button will
appear in the place of the
Image processing
button only if
Start System
or
Offline/Demo
was
selected (Fig. 6).
−
You can leave the software by choosing the
File
menu from the main tool area and selecting
Exit
.
−
You can select a database before booting, if you
wish to change the current one. To change the
database, open the
Hardware configuration
database
expansion field (Fig. 8). The expansion
field displays the currently loaded database and its
location on the hard disc.
Fig. 6
Starting the ZEN software – The
Login "ZEN" dialog with Boot
Status field expanded and during
the process of booting
Fig. 7
Message to remove sample, prior
to initialization of the
positioning unit
Fig. 8
Hardware configuration
database - The Login "ZEN"
dialog allows you to boot the
Software in different modes. If
the Boot Status is closed, the
options are Start System and
Image Processing.
Содержание Lightsheet Z.1
Страница 1: ...Lightsheet Z 1 Operating Manual February 2013 ZEN 2012 black edition ...
Страница 4: ......
Страница 170: ......
Страница 427: ...Lightsheet Z 1 Overview ...