![background image](http://html1.mh-extra.com/html/zeiss/lightsheet-z-1/lightsheet-z-1_operating-manual_927692009.webp)
Lightsheet Z.1
Maintenance and Cleaning
Carl Zeiss
02/2013
000000-1790-528
5
e) To clean and disinfect the detection optics unit proceed as follows:
•
Make sure that no cleaning fluid is allowed to enter the system.
•
To avoid scratches, do not wipe the front lens of the optics with dry lens paper and lens cloths.
•
Remove these optics from the system cavity as necessary.
•
Clean the front lens of optical elements according to general recommendations (see "The clean
microscope" www.zeiss.com/microscopy) using an optical cleaning solution (Carl Zeiss optical cleaning
solution: 85
% n - hexan, 15
% isopropanol. This solution is not sold by Carl Zeiss Microscopy GmbH)
and a suitable lens cleaning paper or high purity cotton wool.
•
In addition to the cleaning procedure described above, for special sterility requirements the front lens
area of the detection modules can be cleaned several times with a lint-free lens cloth or lens paper
soaked in 100
% ethanol. Here again, observe the general notes on cleaning the optics
("The clean microscope").
1.1
Maintenance of the Liquid Cooling System
If detection modules in your Lightsheet Z.1 are connected to a liquid cooling system, consider that the pH
value of the cooling liquid changes over time.
To prevent corrosion in the cooler of the detection module, the pH value of the cooling liquid must be
checked at least once a year and the liquid replaced as necessary. Observe the directions of the cooling
system manufacturer in the supplied operating manual.
If you have signed a service agreement with Carl Zeiss, our service staff will perform the check as part of
the maintenance procedure.
The safety data sheet for the cooling liquid should also be observed.
Содержание Lightsheet Z.1
Страница 1: ...Lightsheet Z 1 Operating Manual February 2013 ZEN 2012 black edition ...
Страница 4: ......
Страница 170: ......
Страница 427: ...Lightsheet Z 1 Overview ...