![background image](http://html1.mh-extra.com/html/zeiss/lightsheet-z-1/lightsheet-z-1_operating-manual_927692344.webp)
Carl Zeiss
Left Tool Area and Hardware Control Tools
Lightsheet Z.1
174
000000-1790-528
02/2013
In step 3 the zoom center is determined. A graphic
of the grating is displayed on the left hand side of
the window (Fig. 271). Two squares are labeled
with white crosses in this image. On the right hand
side, a live image of the grating is shown. Now
mark the same squares as shown in the graphic in
the live image by simply clicking on them with the
left mouse button. This will be repeated for a
second zoom step. The following text will be
shown: "Determining the detector center. Please
click on the two squares in the right live image of
the grid that are marked with the white cross
within the left image display. Repeat for both
zoom settings, then continue."
Step 4 is the final step in which the alignment for all filters and detection module channels is performed.
A progress bar is present at the bottom of the window. When the procedure is finished, the
Finish
button becomes available. Press it to save all adjustments and leave the wizard. This text is displayed:
"Detector Alignment for all available filters in progress, please wait."
If you still encounter pixel shifts between two channels after the Automatic Camera Alignment tool, you
can fine tune the settings using the Manual Detector Alignment tool, see section
Fig. 271
Automatic Detector Alignment,
third step
Содержание Lightsheet Z.1
Страница 1: ...Lightsheet Z 1 Operating Manual February 2013 ZEN 2012 black edition ...
Страница 4: ......
Страница 170: ......
Страница 427: ...Lightsheet Z 1 Overview ...