Yamaha YZ250F(P)/LC, Руководство по эксплуатации для владельца, Страница: 544 / 666

5 - 44
CHAS
HANDLEBAR
8. Install:
●
Brake master cylinder 1
●
Brake master cylinder bracket 2
●
Bolt (brake master cylinder bracket) 3
NOTE:
●
Install the bracket so that the arrow mark
a
faces upward.
●
First tighten the bolt on the upper side of the
brake master cylinder bracket, and then
tighten the bolt on the lower side.
T
R .
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
9. Install:
●
Engine stop switch 1
●
Clutch lever holder 2
●
Bolt (clutch lever holder)
3
●
Decompression lever holder 4
●
Bolt (decompression lever holder) 5
●
Clamp 6
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R .
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
NOTE:
●
The engine stop switch, clutch lever holder,
decompression lever holder and clamp
should be installed according to the dimen-
sions shown.
●
Pass the engine stop switch lead in the mid-
dle of the clutch holder.
10. Install:
●
Clutch cable 1
●
Decompression cable 2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and decompression cable
end.
B
2
1