Woodward HighPROtec MCDLV4, Руководство пользователя

Страница: 126 / 1275

Input, Output and LED Settings
Parameter Description Setting range Default Menu path
Disarm Mode CAUTION! RELAYS DISARMED in order to
safely perform maintenance while
eliminating the risk of taking an entire
process off-line. (Note: The Supervision
Contact cannot be disarmed). YOU MUST
ENSURE that the relays are ARMED AGAIN
after maintenance.
permanent,
timeout
permanent [Service
/Test (Prot
inhibit)
/DISARMED
/BO Slot X2]
t-Timeout
DISARM
The relays will be armed again after
expiring of this time.
Only available if: Mode = Timeout DISARM
0.00 - 300.00s 0.03s [Service
/Test (Prot
inhibit)
/DISARMED
/BO Slot X2]
Force Mode By means of this function the normal Output
Relay States can be overwritten (forced) in
case that the Relay is not in a disarmed
state. The relays can be set from normal
operation (relay works according to the
assigned signals) to "force energized" or
"force de-energized" state.
permanent,
timeout
permanent [Service
/Test (Prot
inhibit)
/Force OR
/BO Slot X2]
t-Timeout Force The Output State will be set by force for the
duration of this time. That means for the
duration of this time the Output Relay does
not show the state of the signals that are
assigned on it.
Only available if: Mode = Timeout DISARM
0.00 - 300.00s 0.03s [Service
/Test (Prot
inhibit)
/Force OR
/BO Slot X2]
126 MCDLV4 DOK-HB-MCDLV4-2E