Woodward HighPROtec MCDLV4, Руководство пользователя, Страница: 1193 / 1275

General Lists
Name Description
UFLS.AdaptSet3-I Module input state: Adaptive Parameter3
UFLS.AdaptSet4-I Module input state: Adaptive Parameter4
UFLS.AdaptSet5-I Module input state: Adaptive Parameter5
AR.active Signal: active
AR.ExBlo Signal: External Blocking
AR.Standby Signal: Standby
AR.t-Blo after CB man
ON
Signal: AR blocked after circuit breaker was switched on manually. This timer will be
started if the circuit breaker was switched on manually. While this timer is running,
AR cannot be started.
AR.Ready Signal: Ready to shoot
AR.running Signal: Auto Reclosing running
AR.t-dead Signal: Dead time between trip and reclosure attempt
AR.CB ON Cmd Signal: CB switch ON Command
AR.t-Run2Ready Signal: Examination Time: If the Circuit Breaker remains after a reclosure attempt for
the duration of this timer in the Closed position, the AR has been successful and the
AR module returns into the ready state.
AR.Lock Signal: Auto Reclosure is locked out
AR.t-Reset Lockout Signal: Delay Timer for resetting the AR lockout. The reset of the AR lockout state
will be delayed for this time, after the reset signal (e.g digital input or Scada) has
been detected .
AR.Blo Signal: Auto Reclosure is blocked
AR.t-Blo Reset Signal: Delay Timer for resetting the AR blocking. The release (de-blocking) of the AR
will be delayed for this time, if there is no blocking signal anymore.
AR.successful Signal: Auto Reclosing successful
AR.failed Signal: Auto Reclosing failure
AR.t-AR Supervision Signal: AR Supervision
AR.Pre Shot Pre Shot Control
AR.Shot 1 Shot Control
AR.Shot 2 Shot Control
AR.Shot 3 Shot Control
AR.Shot 4 Shot Control
AR.Shot 5 Shot Control
AR.Shot 6 Shot Control
AR.Service Alarm 1 Signal: AR - Service Alarm 1, too many switching operations
AR.Service Alarm 2 Signal: AR - Service Alarm 2 - too many switching operations
AR.Max Shots / h
exceeded Signal: The maximum allowed number of shots per hour has been exceeded.
AR.Res Statistics Cr Signal: Reset all statistic AR counters: Total number of AR, successful and
unsuccessful no of AR.
AR.Res Service Cr Signal: Reset the Service Counters for Alarm and Blocking
AR.Reset Lockout Signal: The AR Lockout has been reset via the panel.
AR.Res Max Shots / h Signal: The Counter for the maximum allowed shots per hour has been reset.
AR.ExBlo1-I Module input state: External blocking1
1193 MCDLV4 DOK-HB-MCDLV4-2E