Woodward HighPROtec MCDLV4, Руководство пользователя, Страница: 346 / 1275

Communication Protocols
Application Example Setting a Relay:
Binary Output signals of the DNP cannot directly be used in order to switch relays because the DNP Binary Outputs
are pulse signals (by DNP definition, not steady state). Steady states can be created by means of Logic functions.
The Logic Functions can be assigned onto the Relay Inputs.
Please note: You can use a Set/Reset element (Flip Flop) from Logics.
Direct Commands of the DNP
Parameter Description Setting range Default Menu path
Res all Diag Cr Reset all diagnosis counters inactive,
active
inactive [Operation
/Reset]
Slave Id SlaveId defines the DNP3 address of this
device (Outstation)
0 - 65519 1 [Device Para
/DNP3
/
Communication
]
346 MCDLV4 DOK-HB-MCDLV4-2E
BO
Signal Set Relay
Signal Reset Relay
Pulse Signal
Pulse Signal
Logics
Assign Logic Functions onto Relay Inputs
>1
>1