Woodward HighPROtec MCDLV4, Руководство пользователя

Страница: 1191 / 1275

General Lists
Name Description
PF[2].TripCmd Signal: Trip Command
PF[2].Compensator Signal: Compensation Signal
PF[2].Impossible Signal: Alarm Power Factor Impossible
PF[2].ExBlo1-I Module input state: External blocking
PF[2].ExBlo2-I Module input state: External blocking
PF[2].ExBlo TripCmd-I Module input state: External Blocking of the Trip Command
Q->&V<.active Signal: active
Q->&V<.ExBlo Signal: External Blocking
Q->&V<.Fuse Fail VT Blo Signal: Blocked by Fuse Failure (VT)
Q->&V<.Alarm
Signal: Alarm Reactive Power Undervoltage Protection
Q->&V<.Decoupling
Distr. Generator
Signal: Decoupling of the (local) Energy Generator/Resource
Q->&V<.Decoupling PCC Signal: Decoupling at the Point of Common Coupling
Q->&V<.Power Angle
Signal: Admissible power angle exceeded
Q->&V<.Reactive Power
Thres Signal: Admissible Reactive Power Threshold exceeded
Q->&V<.VLL too low Signal: Line-to-Line voltage too low
Q->&V<.ExBlo1-I Module input state: External blocking1
Q->&V<.ExBlo2-I Module input state: External blocking2
ReCon[1].active Signal: active
ReCon[1].ExBlo Signal: External Blocking
ReCon[1].Blo by Meas
Ciruit Superv
Signal: Module blocked by measuring cirucuit supervision
ReCon[1].Release
Energy Resource Signal: Release Energy Resource.
ReCon[1].ExBlo1-I Module input state: External blocking1
ReCon[1].ExBlo2-I Module input state: External blocking2
ReCon[1].V Ext Release
PCC-I
Module input state: Release signal is being generated by the PCC (External Release)
ReCon[1].PCC Fuse Fail
VT-I State of the module input: Blocking if the fuse of a voltage transformer has tripped at
the PCC.
ReCon[1].reconnected-I This signal indicates the state "reconnected" (mains parallel).
ReCon[1].Decoupling1-I Decoupling function, that blocks the reconnection.
ReCon[1].Decoupling2-I Decoupling function, that blocks the reconnection.
ReCon[1].Decoupling3-I Decoupling function, that blocks the reconnection.
ReCon[1].Decoupling4-I Decoupling function, that blocks the reconnection.
ReCon[1].Decoupling5-I Decoupling function, that blocks the reconnection.
ReCon[1].Decoupling6-I Decoupling function, that blocks the reconnection.
ReCon[2].active
Signal: active
ReCon[2].ExBlo Signal: External Blocking
ReCon[2].Blo by Meas
Ciruit Superv
Signal: Module blocked by measuring cirucuit supervision
1191 MCDLV4 DOK-HB-MCDLV4-2E