Woodward HighPROtec MCDLV4, Руководство пользователя, Страница: 390 / 1275

Communication Protocols
Parameter Description Setting range Default Menu path
ExBlo1 External blocking of the module, if blocking
is activated (allowed) within a parameter set
and if the state of the assigned signal is
true.
1..n,
Assignment List
-.- [Protection
Para
/Global Prot
Para
/Prot-Transfer
/ProtCom]
ExBlo2 External blocking of the module, if blocking
is activated (allowed) within a parameter set
and if the state of the assigned signal is
true.
1..n,
Assignment List -.- [Protection
Para
/Global Prot
Para
/Prot-Transfer
/ProtCom]
Use remote
access
Controls, if 'Smart view' could access to
device data (values and settings) of the
remote device.
inactive,
active
active [Protection
Para
/Global Prot
Para
/Prot-Transfer
/ProtCom]
24h Err
WarnLev Set a warning level for maximum errors per
24h. An Error Rate above this level will
generate a warning of signal quality.
0 - 1000000 12 [Protection
Para
/Global Prot
Para
/Prot-Transfer
/ProtCom]
Force Mode By means of this setting the forced state
could be triggered permanently oder limited
by timeout.
permanent,
timeout
timeout [Service
/Test (Prot
inhibit)
/Force ProtCom
/ProtCom]
t-Timeout Force The forced status is limited to this time.
Only available if: Mode = timeout
0 - 1200s 600s [Service
/Test (Prot
inhibit)
/Force ProtCom
/ProtCom]
Inputs of the Protection Communication
Name Description Assignment via
ExBlo1-I Module input state: External blocking1 [Protection Para
/Global Prot Para
/Prot-Transfer
/ProtCom]
390 MCDLV4 DOK-HB-MCDLV4-2E