Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 272 / 327

Service and maintenance of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 272
8.13.4 Inspection criteria for hydraulic hose pipes
Immediately have hydraulic hose pipes replaced by an authorised
workshop as soon as you detect any of the following defects:
•
Damaged outer layer down to the liner (e.g. due to chafing
points, cuts, cracks).
•
Embrittled outer layer (visible by cracking of hose material).
•
Unnatural deformations of the hydraulic hose pipe in
depressurised as well as in pressurised state or when bent
(e.g. separation of layers, blistering, pinches, kinks).
•
Leaks.
•
Damaged, deformed or leaking fitting.
•
Hose slipping out of the fitting.
•
Corroded fitting which may affect the function and the strength.
•
Improperly laid hydraulic hose pipes, e.g. ignored bending radii,
laying over sharp edges.
•
The hydraulic hose pipe is older than 6 years.
8.13.5 Replace hydraulic filter
Have the filter element (1) replaced by an authorised workshop after
approx. 250 service hours. Then as necessary, at least every 1000
service hours.
WARNING Risk of accidental contact with hydraulic oil due to hydraulic oil
squirting out under high pressure and entering the body!
•
Replacement of the hydraulic filter is not allowed with the
hydraulic system being under operating pressure.
•
Only replace the hydraulic filter when the hydraulic system of
the machine is not connected to the tractor.
Soiled filters cause stronger heating-up of oil.