Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 296 / 327

Remedy of malfunctions
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 296
9.3 List of malfunctions, electrical system
Malfunction Cause Remedy
No function working No power at the control set Provide a voltage of 12 V at the
tractor
Defective fuse Replace fuse
Loose contact in socket Remedy loose contact
Operating element On/Off not
switched Set operating element to On
Functions work irregularly Cable cross section of feed line
too small Select larger cable cross section
Fuse at tractor often defective Fuse protection too weak Install a fuse of at least 25 A,
check cable cross sections
(rated cable cross section = min.
4 mm
2 )
Damaged cable Replace cable
Feed function cannot be
controlled No power, 12 V at the control
set Provide a voltage of 12 V at the
tractor
Cable cross section of feed line
too small Select larger cable cross section
Defective control set Have control set checked
Defective solenoid of a hydraulic
valve Replace solenoid
Feed function can only
temporarily be controlled Loose contact at solenoid Remedy loose contact
Cable cross section of feed line
too small Select larger cable cross section
Feed function does not work Defective solenoid of feed Replace solenoid
2 or more functions work
simultaneously Damaged cable Replace cable
Several simultaneously
energised solenoids Check cable
Emergency manual operation
function actuated Check whether knurled screws
of control block are unscrewed,
unscrew if necessary
Function does not work although
a voltage of 12 V is available at
the solenoid Defective solenoid Replace solenoid
Display of control set does not
work No 12 V voltage Provide a voltage of 12 V at the
control set
Defective fuse at the tractor Replace fuse
The display of a function does
not show a status message on
the control set Defective wiring (short-circuit) Check wires, replace them if
necessary
Sensor not properly set Adjust sensor
Defective sensor Replace sensor