Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 245 / 327

Service and maintenance of machine
245 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
Installation of cam-type cut-out clutch
1.

Insert the locking cams (6) and the spring assembly (7) into the hub (5).
2.

Push the pre-assembled hub (5) into the clutch housing (8).
3.

Insert the supporting ring (4) and the adjusting washers (3) and secure them by means of the
circlip (2).
4.

Again, apply grease to the adjusting washers, supporting ring and circlip.
5.

Insert the sealing ring.
Attention! It is imperative to pay
attention to the position of the
chamfer at the locking cams
when inserting the hub.
(1) Correct position of locking cams in the
clutch housing.
(2)

Incorrect position of locking cams in the
clutch housing.
Fig. 98
The guarantee for the machine will immediately become null and
void if the set torque of the cam-type cut-out clutch is manipulated.
In case of doubt, have the torque of the cam-type cut-out clutch
checked or set, if necessary, by an authorised workshop.