Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 244 / 327

Service and maintenance of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 244
8.7 Carry out maintenance work on the cam-type cut-out clutch
Cam-type cut-out clutches must transmit high power. In order to
ensure perfect functioning and a long service life, regular
maintenance (basic lubrication) with special Walterscheid grease
every 500h / once a year is imperative.
Never clean cam-type cut-out clutches by means of a pressure
washer! Water would penetrate the clutch interior and cause
corrosion at the clutch components.
Insufficient or incorrect maintenance / cleaning of the cam-type cut-
out clutch may cause serious damage to the machine.
Only an authorised workshop is allowed to carry out the work
specified below!
The manufacturer will not assume any warranty and liability for
material damage and personal injuries if the work is carried out by
insufficiently qualified staff.
Preparation:
•
Secure tractor and machine against accidental starting and rolling.
•
Remove the cam-type cut-out clutch from the machine.
Fig. 97
Disassembly of cam-type cut-out clutch
1.

Use a screwdriver to remove the sealing ring (1) from the clutch housing (8).
2.

Use an appropriate tool to remove the circlip (2).
3.

Remove the adjusting washers (3) and the supporting ring (4).
4.

Pull the hub (5) out of the clutch housing (8).
It is imperative to pay attention to the position of the chamfer of the locking bolt (6) when pulling
out!
5.

Take the locking bolts (6) and the spring assembly (7) out of the hub.
6.

Clean all parts and check them for wear / damage.
7.

Grease all parts with special Walterscheid grease "Agraset 116".
8.

Fill the grooves in the clutch housing with grease.