Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации, Страница: 290 / 327

Service and maintenance of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 290
8.17.5 Adjust travelling height via three-way cock
Depending on the tyres and extensions used, the vehicle height may
significantly vary.
Make sure not to exceed the admissible vehicle height (in Germany:
4 m) when setting the travelling height!
•
The travelling height is adjusted on firm, even ground via the
levelling valve with the machine being empty.
•
The travelling heights of the right-hand and left-hand machine
side are separately set. The procedure for setting the travelling
height is the same on both machine sides.
•
For safety reasons, the machine lowers only slowly.
Set the correct distance X between the locating
points of the hydraulic cylinders (7) one after
another on the right-hand and left-hand machine
side.
1.

Hitch the machine to the tractor.
2.

Park the tractor and the empty machine on
even ground.
3.

Secure tractor and machine against
accidental starting and rolling.
Ensure that the brakes of the
machine are not applied.
4.

Connect the hydraulic hose pipes of the
levelling valve with a single-acting control
device of the tractor.
Fig. 165
5.

Use the upper stop-cock (2) to preselect the vehicle side to be pressurised. In middle position,
the line is blocked.
6.

Turn the lower stop-cock (3) slowly to vertical position to increase the distance X.
A second person is helpful for monitoring the setting of the travelling
height next to the vehicle and assisting the operator on the tractor
with the setting of the hydraulic cylinders.